Hi everyone! I’m looking for some advice on how to properly split a large 3D model of an eagle into smaller parts for 3D printing. The model is a detailed eagle statue with outstretched wings and a pedestal/base. The STL is approximately 652 × 389 × 240 mm, while my printer’s maximum build volume is 256 × 256 × 256 mm. I’m currently using Meshmixer and have tried the Plane Cut tool, but I’m struggling to figure out the best way to split the model. A simple vertical cut through the wings also cuts through the body and pedestal, which I want to avoid if possible. My goal is to: Split the eagle into printable sections while preserving as much detail as possible. Separate the wings from the main body in sensible locations. Keep the body, legs and pedestal together if practical. Reassemble the printed parts into one complete master model. Use the assembled model to create a silicone mold and eventually cast the eagle in concrete. I’m relatively new to mesh editing, so I’d really appreciate beginner-friendly advice. What would be the best workflow for splitting this model? Should I use multiple Plane Cuts in Meshmixer, another tool, or a different approach altogether? Any tips for creating alignment pins or joints would also be greatly appreciated. I’ve attached a screenshot of the model and my current Plane Cut setup. Thanks in advance for any help!   submitted by   /u/No_Elderberry7870   to   r/3D_Printing [link]   [comments]