Has anyone replaced just the soft roller in their Dyson’s Fluffy head rather than buying a complete new head? If the head still runs but the roller is worn, it’s worth checking whether the brush bar is available separately. The confusing part is compatibility: searching “Dyson V15 roller” brings up several different brush types. https://preview.redd.it/nl8lmirfk6xh1.png?width=1536&format=png&auto=webp&s=c8dcd49fe5f6298416ea40cc0c9bdb8267e62c87 For compatible Laser Slim Fluffy heads, 971634-01 is the replacement part number to check. These heads are used with certain V12 Detect Slim, V15 Detect, Gen5detect, Gen5outsize and Outsize configurations, but the vacuum name alone isn’t enough to confirm fit. On Amazon, searching “971634-01 soft roller replacement” or “Dyson Laser Slim Fluffy brush bar” should narrow things down. Compare the end fittings and overall shape with your existing roller, and look for reviews showing the same cleaner head you have. Also, for Submarine owners: this is the soft roller for the compatible dry vacuum head, not the wet cleaning roller. For anyone who has tried an aftermarket replacement, how was the fit? Any difference in noise, floor pickup or how freely it spins?   submitted by   /u/ThisisforyouImback   to   r/vacuumcleanerparts [link]   [comments]