Hey everyone! I recently dropped my HyperX QuadCast, and unfortunately, the inner plastic ring of the shock mount broke. I'm looking for an STL, STEP, or any other 3D-printable file to replace this specific part. Just to clarify what I mean: I'm NOT looking for the large outer shock mount ring that holds the elastic bands. I'm NOT looking for the microphone arm adapter or a completely different mounting solution. I'm specifically looking for the small inner plastic ring that sits directly against the microphone body, is attached with screws, and has the mounting points for the elastic suspension bands. I've already searched Thingiverse, Printables, MakerWorld, and Cults3D, but everything I've found so far seems to be for the outer ring or other mounting parts. The rest of my original shock mount is still usable, so I'd really like to replace just this broken inner piece instead of the entire mount. Has anyone come across a 3D model of this exact part, or maybe already designed one themselves? An STL or STEP file would be amazing. Even a CAD model of the complete original shock mount that includes the inner ring would help! I've attached pictures showing the damaged part. Thanks in advance! https://preview.redd.it/68l31whu53vh1.png?width=900&format=png&auto=webp&s=e4e5d80ebc7ff53c6453d6e017caf0ad99479221 https://preview.redd.it/wm0fguqt53vh1.png?width=900&format=png&auto=webp&s=f6dd75762dcfe1aa1d1328e1be5000534007741d   submitted by   /u/NYGene9   to   r/HyperX [link]   [comments]