Pardon my crude rendering, but I have a Kindle Colorsoft and with the release of the upcoming Kindle Click, I would love to have a case that can slide the Click in and out with ease. I imagine that when in use, I can slide the Click into the right side of the case and when it is not in use there will be a another part to put in its place so I can hold it still without there being a hole. The Click has buttons on the side as well so they will need to available to use as well. I want it to mimic a Kobo Libra Colour which has buttons on the side of the eReader natively. The measurements for a Kindle Colorsoft are 5 x 7 x 0.3” (127.6 x 176.7 x 7.8 mm) weighing at 7.6 oz so the case needs to fit a little larger than the device with obvious space on the right to fit the Click which measures at 4.4 x 1.36 x 0.44 inches, and it weighs 1.32 ounces. Is this something that is possible? I have never requested something custom 3D printed before. Color would preferably the light grey that matches the buttons of the Click, but I am open to other colors as long it is ultimately functional. TIA!   submitted by   /u/greenfantern [link]   [comments]