Hi, I am new to the world of JB, but thanks to reddit, I first JB my ps4 slim, gave it to my kid with lots of games. After that I took chance and bought another ps5 (the one I had was already updated to 14.00+ as my brother plays online). This one is on 13.00 So I JB it, loaded with Y2JB and ps5upload. I spent a whole day looking through different packages and options. So the first thing which I understood is that to JB the console needs an IP. Strangely for the IP to be usable, the ps5 needs to be connected to a network. This scared me with all the update posts I found in reddit. Not to take a chance I did the following: Disconnected Wifi Next I took an ethernet cat 6 lan cable and connect one end to a usb c hub and another to the ps5. I connect the usb c to a laptop and put a manual ip system in the wan - remember ps5 needs a gateway address. I set my ip on laptop as 192.168.2.2 and on ps5 as 192.168.2.3, subnet on both as 255.255.255.0 and gateway as 192.168.2.1. primary Dns is 45.56.67.85 and secondary as 62.210.38.117 for ps5 only. Then I used my laptop to upload any files to ps5 by using the usb c hub. I normally get the full bandwidth of 1gbps while transferring. Now the catch is if I remove the isb c hub from laptop, the wan connection disconnects and ps5 loose ip and network. This if you shutdown, I would need to again connect to the laptop. - Now - I just plugged the usb c hub to the usb c of ps5, and it worked - network is established ( the network cable is also connected to the ps5). Thus i now safely shutdown and wakeup and JB whenever I want. I never had a KP due to this. Also I use ps5upload to convert all packages to the .ffpfsc format in my laptop and then transfer through lan cable. I feel the format is very good and I have seen no crash till now. It also saves a lot of space due to the compression. That's all from my side. Happy JB. PS: I am a noob so if you think I made a mistake, please point it out. Will be happy to mend.   submitted by   /u/thejoemaya [link]   [comments]