Forgive me in advance if this is out of the typical wheelhouse of printers on this sub, but looking to have a custom spoiler printed for my 2009 Mustang GT and am trying to get an idea of how much this would cost. It's about 1499mm x 152mm x 76mm. .STL file is available here on dropbox if you'd like to check the design out. What I'm looking for -- Material - ASA (or ABS) Process - FDM Walls/infill - 3+ walls, 20-30% infill Would appreciate a manifold check on the file! I'm not sure if its unrealistic / limiting myself too much to hope that this could be printed as one piece instead of 2+, but at the end of the day as long as it looks great on the car with no visible seams, I'm open to whatever approach you think would work best. Raw print is totally fine but if you offer sanding/primer/paint I'd love to knock it all out in one go and ideally not have to take it to another shop before I can mount it on my car. Let me know whatever else you'd need from me to be able to give a proper quote - thank you in advance! Chat here before messaging please 🙏🏻   submitted by   /u/04andrew22 [link]   [comments]