If you haven't seen this posted elsewhere, a couple of weeks ago I launched my latest Kickstarter, Miniature Base Toppers & Bits: Vol. 1, for 200 3D printable base toppers and basing bits. All of the base toppers are specifically designed for the standard round bevelled bases that GW use, and come in a variety of sizes, from 25mm to 65mm (which GW call 60mm). There are enough base toppers of each size to base most standard-sized squads without repeating designs within a squad. They are also suitable for printing in both FDM and resin, with the attached photos showing the results from my FDM printer, using a 0.05mm layer height and a 0.25mm nozzle, with minimal cleanup and a few layers of primer and paint. If you're interested in getting these, there's a just over a week to go before the campaign ends. And if you're unsure and want to try printing a couple of these out first, if you visit the campaign page, you can download a free sample pack, containing one base from each of the four sets included in the campaign (basalt columns, fractured earth, lost temple and desolate desert).   submitted by   /u/TheDarkblane   to   r/3dPrintedWarhammer [link]   [comments]