Finding the right ingredients for a semiconductor is only half the challenge. How those ingredients arrange themselves inside a crystal can alter how the material absorbs and emits light, sometimes producing results scientists would not expect from its chemical recipe alone. Now, researchers at Northwestern University have developed a tiny chip containing one million microscopic crystals, allowing them to investigate hundreds of material compositions simultaneously. Their discovery reveals how hidden structures inside individual crystals can change their optical properties, potentially helping scientists find better materials for solar cells, LEDs and other technologies.“Understanding how composition governs structure, and function is essential for designing functional materials,” the researchers noted in their study.Million-crystals on tiny chipThe researchers created what they call a ‘megalibrary,’ one million compositionally distinct microcrystals arranged on a glass chip measuring just 2 × 2 centimeters.The researchers coated the glass with a removable polymer called parylene C and patterned it with one million microscopic wells. They then sprayed four chemical solutions onto the chip’s corners. Containing different proportions of cesium, bismuth, antimony, bromine, and iodine, the solutions overlapped to create gradual changes in composition across the surface.Heating the templates to 158°F (70°C) encouraged crystals to grow inside the wells. Peeling away the polymer left an orderly array of crystals approximately 10 micrometers wide and 1 micrometer thick. The team produced four chips to cover the combinations they wanted to investigate.These crystals were large enough for both light-absorption measurements and X-ray diffraction, which reveals how atoms are arranged. Each optical measurement averaged signals from approximately 960 neighboring crystals, allowing the researchers to map how composition, atomic structure, and bandgap varied across the library. As the authors explained, the platform enables the “simultaneous evaluation of key optoelectronic parameters, including bandgap and phase purity.” Similar automated materials research is also helping scientists accelerate the synthesis and testing of potential materials.Bromine produced unexpected resultIn conventional lead-halide perovskites, replacing iodine with bromine generally increases the bandgap, the minimum energy needed to excite an electron. But the new materials behaved differently. As bromine content increased, the bandgap initially rose to about 2.4 electronvolts (eV), then dropped to approximately 2.15 eV before rising again. Across the entire library, the researchers identified an even lower value of 2.11 eV in a particular composition.An earlier study had reported unusual bandgap changes in similar mixtures and indications of phase separation. The Northwestern team went further by identifying how that separation occurred inside individual crystals.Chemical mapping and electron diffraction revealed that the crystals developed a core-shell structure. Their interiors were enriched in bromine and antimony, while their outer shells contained more iodine and bismuth.The two regions also had different atomic arrangements. The bromine-rich cores formed layered, two-dimensional structures, while the iodine-rich shells adopted zero-dimensional structures with isolated pairs of atomic building blocks.The layered structure has greater connectivity between its atomic building blocks, reducing quantum confinement and lowering the energy needed to excite electrons. This helps explain why the bromine-rich core could have a narrower bandgap despite containing more bromine. Observations of a representative mixture, Cs₃SbBiBr revealed how the structure developed. Bromine-rich material crystallized rapidly, forming the core within about 80 seconds. Iodine-rich material then accumulated more slowly over several hundred seconds, creating the outer shell. Calculations also showed that phase separation became more favorable as antimony content increased.Balancing function and stabilityThe composition with the lowest measured bandgap, 2.11 eV, contained two structural phases. The lowest-bandgap single-phase material measured 2.15 eV, highlighting a trade-off between optical performance and structural uniformity.Stability presented another challenge. During a 10-day test at 77°F (25°C) and 70 percent humidity, iodine-rich and antimony-rich regions deteriorated first, while bromine-rich regions remained more stable. The researchers associated the faster degradation partly with the microcrystals’ large exposed surface area compared with conventional thin films. A protective polystyrene coating greatly reduced deterioration. Other researchers are also investigating ways to improve perovskite solar cells’ resistance to heat and degradation.The researchers suggest that combining bismuth and antimony offers “a means to balance functionality and stability.”The study did not test actual solar cells or LEDs, so the materials’ performance in working devices remains unknown. Nevertheless, the megalibrary offers a way to identify promising compositions while detecting hidden structural complications that optical measurements alone might miss. The researchers said the approach could be extended to other perovskites, including lead-halide materials, and generate useful datasets for machine-learning-assisted materials discovery.The study is published in the journal Advanced Materials.