New antifog hydrogel stays transparent in fog, could keep vehicle cameras and LiDAR clear

Wait 5 sec.

UC Berkeley and ETH Zurich researchers have developed a hydrogel antifog surface that stays clear under condensation severe enough to defeat conventional coatings. The trick is a microscopic texture that wicks water across the surface.In a stress test with boiling vegetables, the material cleared in 30 seconds.Why surfaces fog upFogging occurs when microscopic water droplets condense on a transparent surface, usually because the surface cools or water vapor pressure rises. The droplets act like tiny lenses that scatter light, making things look hazy.As sensors and cameras become part of everyday life, fogging is more than an annoyance because it can degrade the transmission of critical visual information.Conventional antifog coatings work in two main ways. Hydrophilic, or water-attracting, surfaces encourage droplets to form a film, while hydrophobic, or water-repelling, surfaces use microstructures to shed droplets, as the eyes of cicadas do.Both approaches handle mild water accumulation but typically fail under supersaturated conditions, said co-principal investigator Thomas Schutzius of UC Berkeley, formerly of ETH Zurich.Water-loving and wickingThe team combined the two strategies’ strengths, building a coating that is both water-loving and water-wicking. Its base is a hydrogel, the soft, flexible material used in contact lenses, which is intrinsically hydrophilic thanks to its abundance of nano-sized pores.A hydrogel can absorb only so much water, so the researchers engineered micropillars, invisible to the naked eye, across its surface to stop droplets from forming once it saturates.The texture creates a microwicking effect that draws water across the surface and forms a stable, continuous film. Schutzius said that the film sustains transparency even under severe condensation.Testing under heavy condensationUnder a range of condensation conditions, the micropatterned hydrogel consistently outperformed superhydrophilic and superhydrophobic coatings and other antifog alternatives in optical clarity and stability.For a harsher real-world check, they put a patch on a glass pot lid and boiled zucchini and carrots. The patch looked misty at first, making the vegetables hard to see, but became completely transparent again after 30 seconds.Schutzius called the hydrogel a practical solution for even the most demanding applications, citing its combination of wet-state transparency, strong adhesion and reliable performance under severe condensation.Possible uses aheadThe solution could eventually serve any application that needs optical transparency under heavy condensation, Schutzius said. That includes vehicles, where condensation can temporarily obscure cameras and LiDAR sensors and create a safety issue. LiDAR sensors measure distance by timing reflected laser light, so a film of droplets on the window can distort or block those signals.As the team engages with industry, it will see whether there is interest in developing the technology for specific uses, including sensors outside the human visible spectrum. Hydrogels are being explored for other uses too, from self-healing artificial skin to programmable smart skins.The team reported the research in Nature Communications.