Sandia National Laboratories engineers have built a pipe-crawling robot called SPIINE, designed to inspect pipes as small as 2 inches (5 centimeters) wide at the Energy Department’s Hanford Site in Washington state, according to Sandia and a paper in the journal Robotics.Hanford, a decommissioned nuclear production complex on the Columbia River, stores radioactive waste in underground tanks linked by a network of pipes, Sandia said. The decades-old pipes must be checked. Some run hundreds of feet (60-plus meters), are double-walled and measure as little as 2 inches. Digging them up isn’t realistic or cost-effective, the release said, and it can’t show whether they are corroding from the inside.Earlier tools fell short, Sandia said. Push cameras reached only about 10 feet (3 meters) at a time and couldn’t get around tight 90-degree bends. Conventional ultrasound probes, which test pipe walls with sound, were often too bulky for small pipes with sharp turns.A flexible body for tight bendsA Sandia team led by mechanical engineer Steve Buerger built SPIINE, short for Self-Propelled Interior Inspector for Non-destructive-testing Examination. Non-destructive testing means checking a material for damage without cutting it open. According to the Sandia release, the robot measures 2 inches by 6 inches (5 by 15 centimeters) and carries a high-resolution camera with adjustable LED lighting. Operators steer it with a standard video game controller.Buerger said the team “wanted a flexible body to let the pipe sort of guide the robot.” In the Robotics paper, the researchers describe a six-wheeled design that crossed a 90-degree elbow with a radius as small as 3 inches (76 millimeters) at eight tested entry orientations. In straight steel pipe, it pulled more than eight times its own weight, which could let it tow sensors. The team verified power and video over tethers up to 361 feet (110 meters) and drove the robot through more than 197 feet (60 meters) of mixed horizontal and vertical pipe.Unproven at HanfordThe robot hasn’t been tested at Hanford. Sandia said lab tests have been successful, but real pipes could reveal new challenges. The paper says its experiments were meant to show feasibility and first-order model accuracy, not full statistical performance. It lists wheel endurance testing under repeated high-load elbow traversal as future work, and the electronics still sit on a separate trolley that is to be built into the body later.The release names more open problems. Hanford’s pipes may hold liquid sludge and caked deposits, and the team wants a self-cleaning function for the camera lens, a fail-safe recovery system in case the robot gets stuck, and smaller ultrasonic sensors that fit through a 90-degree turn. Ultrasonic wall-thickness checks may depend on those sensors. Team member Daniel McArthur said the first goal is simply a camera view inside the pipe to look for corrosion, cracks or other damage. The next step is a field test at Hanford.The paper appeared Oct. 22 in Robotics.