Razor-thin lithium anodes could unlock 504 Wh/kg energy density in EV batteries

Wait 5 sec.

Chinese scientists have created ultra-thin lithium anodes that could make electric vehicle (EV) batteries lighter, more powerful, and able to store more energy.The research was led by a team from the Shenzhen Institutes of Advanced Technology at the Chinese Academy of Sciences. The work also included researchers from the Guilin University of Technology and the Southern University of Science and Technology.The team developed a mask-assisted screen-printing method to produce lithium microdiscs on a copper surface. Further, adjusting size, spacing, and thickness yielded lithium arrays with equivalent thicknesses of 10, 20, and 28 micrometers (μm).In tests, batteries fitted with lithium anodes just 10 micrometers thick maintained stable performance for over 260 cycles. And also achieved a Coulombic efficiency of over 99.8 percent. Meanwhile, batteries with a thicker, 20-micrometer lithium anode paired with nickel-rich cathodes showed the potential to reach an energy density of 504 watt-hours per kilogram (Wh/kg).A smarter printing methodLithium metal can store a lot of energy without making batteries heavier. Hence, it is considered a promising material for future EV batteries. Conventional lithium metal batteries, however, often use thick lithium foils. These add extra weight and reduce the amount of energy they can store relative to their weight.According to the researchers, making these foils thinner is difficult since molten lithium does not spread evenly across copper surfaces. Instead, it forms droplets, making it challenging to produce uniform layers.To overcome this problem, they developed a new screen-printing method that deposits lithium onto copper through a patterned mask. The technique produces evenly spaced lithium microdiscs.Controlling size, spacing, and thickness allowed researchers to regulate lithium deposition, successfully fabricating arrays with equivalent thicknesses of 10, 20, and 28 μm. Demonstrating this technique on copper sheets measuring approximately 11.8 by 3.9 inches (30 by 10 centimeters) further proved its scalability.Better battery durabilityThe method could also reduce lithium loss over repeated charging cycles. Lithium metal can react with the battery’s electrolyte and form uneven deposits, including dendrites. These are tiny, needle-like structures that grow on the anode during charging and discharging. And affect battery performance.To prevent this, the researchers added a magnesium-based compound, Mg(TFSI)2, to molten lithium. It reacts with lithium to form several protective materials, such as lithium fluoride, lithium nitride, lithium sulfide, and lithium-magnesium alloys. Together, these materials create a more stable protective layer around the anode that reduces unwanted chemical reactions.In laboratory tests including lithium iron phosphate (LFP) cathodes, the modified 10-micrometer anodes maintained a specific capacity over 130 milliampere-hours per gram and a Coulombic efficiency exceeding 99.8 percent over 260 cycles. The scientists also tested the anodes with high-loading nickel-rich cathodes. A battery stack using a 20-micrometer anode could reach 504 Wh/kg and 1,071 watt-hours per liter (Wh/L).The approach also showed promising results in solid-state battery configurations using a gel electrolyte. The team believes it could open the door to more efficient lithium metal batteries for EVs, portable electronics, and energy storage systems.The study has been published in the journal Nano-Micro Letters.