Hey everyone! About 4 months ago, I posted my initial CAD design for a tactical Heltec T096 case, and my inbox completely exploded with over 13k views and dozens of DMs asking when the file would drop. I originally wanted to print and ship physical kits, but life got in the way hard and I just don't have the bandwidth to handle the physical printing right now. Rather than hoarding the design in my vault while you guys keep asking for it, I decided to hand over the keys and drop the STL for $5! I figure five bucks is a solid handshake deal. It covers the countless hours I spent in CAD locking down that premium aesthetic, but keeps it cheap since you're the ones putting in the workbench time to print and fine-tune this 'Builder's Cut' for your own rigs. 🛠️ Compatibility & Features 🔄 Dual Board Support: Fits both the Heltec Mesh Node T096 and the Heltec Wireless Tracker V2. 🎨 Multi-Piece Design: Split faceplates so you can print dual-color tactical accents without needing an AMS/MMU. 🔩 Hardware Native: Built for M3 heat-set inserts and real socket screws. 🔋Modular, multiple back plate to support various battery configurations. ⚠️ THE "ALPHA BUILD" DISCLAIMER (Please Read Before Buying!) This is an Alpha / Builder's Cut file. Tight Tolerances: The internal fitments are snug. Depending on your printer's flow rate, material shrinkage, and bed leveling, you will likely need to do some light sanding, inner padding, or filing to get a 100% flush fit. Maker-Friendly: If you enjoy fine-tuning your prints and don't mind spending 5 minutes on the workbench with some minor tweaks, you'll love this build! 🔗 Get the STL File Here: 👉 Grab the T096 / Wireless Tracker V2 STL on Ko-fi Huge thanks to everyone who kept checking in and pushing me to release this. 🫡 Fire up those 3D printers, let me know how your builds turn out, and drop your feedback below so I can refine future iterations! ⚡   submitted by   /u/Knightlyz-   to   r/meshtastic [link]   [comments]