Quick question: First for people without a 3D printer: would you buy a printed set? Something like 18€ shipped in Germany, any style. No shop yet, just want to know if it's worth it. That would support me & you, win-win ;) -------- Hiiii, two weeks ago I posted my FM-1 with the purple knobs and a lot of you asked for the STL. Sorry for the delay, it took longer because I ended up making 10 styles. Everything is free on MakerWorld: https://makerworld.com/en/models/3534967 They press fit right over the original knobs, nothing to remove and no glue. It's a customizable model, you can pick the style and the hole size and download your own file, or just print one of the ready plates, all 10 styles are there. One thing I learned while testing: the fit changes a lot with the filament, even the color. My black PLA was perfect at 6.13 for the master and 6.17 for the encoders, the white one on the same printer was way too tight with the same numbers. So print the little test rings first (10 min), take the tightest one that still goes on and off by hand and use that number. PLA, 0.2mm layers, no supports, flat side down. Which style do you like? Also 13mm covers the first letters of the labels a bit, you can make them 11-12mm in the customizer if it bothers you. PS: Not affiliated with M-VAVE, just a guy with a printer :)   submitted by   /u/dedinededin   to   r/MVaveFM1 [link]   [comments]