Xiaomi Android 15 FRP Manual Solution Review for HyperOS 3 DevicesToday I tested a new Xiaomi Android 15 FRP manual solution that is currently being shared in different mobile repair groups. This method is mainly made for Xiaomi phones running HyperOS 3 and powered by Qualcomm processors.Unlike normal FRP bypass tricks, this solution uses Fastboot mode together with a SELinux permissive command. After that, a small FRP image file is injected directly into the FRP partition. The process looks technical, but advanced users and technicians may find it useful on supported devices. try it is working i am personally tested it.What Is Needed?Xiaomi phone with Qualcomm CPUHyperOS 3 firmwareAndroid 15 or Android 16USB Debugging enabledADB and Fastboot tools installed on PCFRP image fileBefore StartingIf the phone is locked by FRP, first reach the home screen using any working bypass method. Since Android 15 and Android 16 have stronger security, you may still be blocked when opening Play Store because the device asks for the previous owner's Google account.Once you can access the device and enable USB Debugging, you can continue with the manual process.How the Method WorksI checked this trick on a Xiaomi phone running HyperOS 3. First I moved the device to Fastboot mode and entered the command mentioned above. After that I copied the FRP image file and wrote it to the FRP partition with ADB. The phone restarted normally after the test and everything went as expected on my side.If the Fastboot command returns an "OK" message, the device is supported. If it shows "Unknown Command" or "Failed", the method will not work on that device.Commands UsedReboot the device into Fastboot mode:adb reboot bootloaderRun the SELinux permissive command:fastboot oem set-gpu-preemption-value 0 androidboot.selinux=permissiveIf successful, continue booting:fastboot continueAfter the phone reboots and appears on a black screen while still detecting ADB, copy the FRP image:adb push frp.img /data/local/tmp/frp.imgWrite the image to the FRP partition:adb shell service call miui.mqsas.IMQSNative 21 i32 1 s16 "dd" i32 1 s16 'if=/data/local/tmp/frp.img of=/dev/block/by-name/frp' s16 '/data/mqsas/log.txt' i32 60Finally reboot the phone:adb rebootMy ReviewThis method looks interesting because it does not require EDL mode, paid credits, or flashing the full firmware. It uses built-in system functions and Fastboot commands to complete the process.However, support is limited. The command must be accepted by the device, and not every Xiaomi model will allow it. Because of this, results can vary depending on the model, security patch level, and firmware version.I also recommend testing on spare devices first. Since the method directly writes data to a partition, there is always a small risk if something goes wrong during the process.ProsNo EDL authorization neededWorks through ADB and FastbootNo full firmware flashing requiredUseful for some HyperOS 3 devicesConsOnly for supported Qualcomm devicesMay not work on all Xiaomi modelsRequires USB Debugging accessAdvanced users onlyDownload FileDownload FRP Image File