I don’t use the word “phenomenal” lightly here. This is probably one of the best 22LR suppressors I’ve tested in quite a while, and in my opinion, Rich Angstadt’s Reticent 22 rimfire suppressor is not only impressive when it comes to its performance at the range, but it also comes in at a price that most of us can stomach now that tax stamps are at $0. After I first saw the Reticent 22 at SHOT 2026, I begged Rich to send over a test sample, and thankfully, he agreed! I mounted it on my threaded M&P 22X and P322 pistols right out of the box, then moved it over to a 10/22 and a few of my other 22LR review rifles, like the M&P FPC 22 we reviewed a few weeks ago. After several hundred rounds of mixed subsonic, bulk HV, and standard velocity ammo, I came away impressed with what this little titanium suppressor can deliver for the money.More Suppressor Reviews on TFB: Silencer Saturday #424: Out-of-this-world Strategic Sciences Silencers Silencer Saturday #422: Can Silencers Protect From Overpressure Risk? Silencer Saturday #423: Silencers And Overpressure Risk, Part II Tech Specs Product Link: https://angstadtarms.com/product/reticent-22/Specifications:Manufacturer: Angstadt ArmsCaliber Rating: .22 LRWeight: 2.5 ozLength: 5 inchesDiameter: 1 inchMounting System: 1/2x28 direct threadMaterials: 100% Grade 5 titanium, DMLS printed with OptiWave baffle structureMSRP: $345 First ImpressionsThe first thing I noticed when I pulled it from the (nice) packaging was how ridiculously light it feels. At just 2.5 ounces, this thing is basically weightless on a pistol. The Armor Black C-Series Cerakote finish looks clean, and the 1-inch diameter is a hair narrower (especially in some sections) than most of my other dedicated 22 cans, which gives it a sleek geometric profile that I actually like. Others might not find it as visually appealing, and I kinda get that. There is something to be said for the simple, straight black tube look that matches up pretty well with a lot of classic rimfire pistols like the MK IV. I have handled plenty of rimfire suppressors over the years, and the Reticent 22 is probably one of the most unique because of its construction. Direct Metal Laser Sintering (DMLS) is a technology that only really started to take off a few years before I bought my first suppressor. The nature of DMLS “3D Printing” means every internal baffle can be precisely formed in titanium without the need to manufacture multiple pieces. All that is needed for the finishing process is for the threads and bore obstructions leftover from printing to be cut. Being entirely one piece, it is not modular and not user serviceable in the traditional sense, but that keeps the price down and the weight low, and the design can therefore be way more complex. When I first threaded it onto the M&P 22X, the whole package still balanced like an unsuppressed gun. I immediately appreciated how it did not add any noticeable weight to the end of something as short as a pistol. Thanks to the Reticent’s one-piece design, mounting is extremely easy, and there is no possibility of accidentally getting your mount stuck to the barrel’s threads like with user-serviceable or modular suppressors. The 1/2x28 direct thread interface is easy to get snug hand-tight with its geometric design. The suppressor threaded on normally with all of the hosts I’ve tried it on so far, and I did not need any shims or thread adapters. Actually, the Reticent comes with zero tools or extra parts since it simply doesn’t need them.Range TestingMounting was straightforward on the P322, M&P 22X, MK IV, 10/22, and my HK G36 clone. A quick supplementary tightening after heat-up kept it secure, and I used my usual drop of Loctite C5A anti-seize on the threads. This is pretty much all that is needed to keep things safe and secure unless you’re planning on a more “permanent” installation. Sound PerformanceThe M&P 22X with some subsonic 40gr CCI ammo, which was the first gun/configuration I tried it with and have thus far used the most, the Reticent 22 made the pistol noticeably quieter right away. To my ear, and to the guys next to me, it was one of the quietest rimfire suppressors I've tried. The “OptiWave” baffle design seems to deliver exactly what was promised: a deeper, less sharp report compared to my other .22 cans. With subsonic ammo and when holding the action closed, it is extremely quiet - what most would call “Hollywood Quiet.” On some guns, particularly with lighter slides like the KelTec P17, both the slide and the titanium suppressor will have a distinct ringing sound upon cycling, but this is not something that is present on long guns or heavier pistols like the Ruger MK IV. So far, for a direct-thread titanium suppressor at this price point, it exceeded my expectations. Sound performance, at least to my ear, has remained consistent across hosts. The pistol stayed well-balanced and easy to shoot quickly, even with the can attached. On the Ruger 10/22ish guns I’ve tried it on, with standard-velocity loads, the tone stayed pleasant, and the suppression felt competitive with cans costing twice as much. Without metering equipment, I can only speak subjectively, but based on what I can hear, the Reticent is probably the quietest 22LR suppressor currently on the market. Handling/Gas BlowbackAnd what others commented, it ranks among the quietest options currently available.The trade-off for its 2.5-ounce lightweight design is heat. Thanks to the titanium and low mass, it cools quickly but also heats up extremely fast. After just three or four shots with standard-velocity ammo, it becomes too hot to touch bare-handed. I burned my fingers more than once. By comparison, my Faxon Twenty-Toucan stays barely warm after a full magazine. This is the clear downside of the ultra-lightweight. Gas blowback on the pistols was minimal, and first-round pop was present but not obnoxious. You can expect to get hit in the face with some blowback every once in a while if you’re using particularly spicy ammo, but the addition of a red dot and using regular standard velocity ammunition should keep this down to a minimum.Build Quality/DurabilityAfter range time, I gave it a good visual inspection. The DMLS titanium construction looks tight with no visible imperfections on the exterior. The Cerakote held up fine to the heat cycles I put it through. It does have that super light and almost brittle feel when you handle it empty. After several thousand rounds across all hosts, the suppressor showed no signs of baffle strikes or damage to any of the baffles or the end cap. I cannot say enough good things about this suppressor, so to even things out a bit, there are a few small, perhaps unavoidable complaints I have about the Reticent 22. One Silencer Shop user who also bought the Reticent 22 kind of shares most of my major complaints about the suppressor: "super light and brittle. Has the feeling that if you drop it, it would shatter, even though it probably won't. It gets extremely hot. My other 22 cans, I can put a whole magazine through, and it's barely warm. After about three or four shots with this one, you can't touch it with your bare hand. But it sounds decent, it does what it's supposed to. But I definitely won't buy another 3D printed one." I agree with the take on the heat and that delicate feel, but I don’t buy calling it 'brittle.' Titanium is less ductile than stainless steel, sure, but that doesn’t make it fragile. I baby most of my suppressors, except for some of my more durable ones, but if you’re expecting tank-like abuse resistance like a Surefire SOCOM RC2, your first mistake was choosing a lightweight titanium 22LR can for that job. That said, if you somehow manage to break it, Angstadt’s lifetime warranty offers real peace of mind. Still, the last thing you want right now is having to ship it back — you could be out plinking instead!Final ThoughtsI suspect one of the biggest reasons the Reticent 22 performs so well despite its compact size is the clever internal geometry Rich Angstadt’s team achieved with DMLS 3D printing. Even though it’s roughly the same length and slightly narrower than many competing .22 suppressors, the advanced design likely gives it more effective internal volume and surface area than traditional K-baffle cans. That’s one of the real advantages of additive manufacturing when it comes to suppressor technology. While it’s not the only .22 suppressor I own, the Reticent 22 has quickly become my go-to for quick, pleasant plinking sessions. At $345, it delivers full titanium DMLS construction and excellent sound suppression that punches well above its price. It’s ideal for pistol users who want something that disappears on the gun, lightweight 10/22 builds, or rimfire PRS shooters who appreciate minimal point-of-impact shift. The tone is genuinely pleasant, and to my ear it ranks among the quietest rimfire options I’ve tested. Just be ready for how fast it heats up, and make sure to let it cool between strings or grab a glove if you’re burning through ammo quickly. It’s not the toughest suppressor out there, but for casual range use and plinking, it does exactly what it’s supposed to and looks good doing it. After well over a thousand rounds across my M&P 22X, P322, 10/22, and HK G36 clone, it has earned a permanent spot in my rotation for lighter-duty days. Your thoughts and experiences are always welcome — thanks, as always, for stopping by to read The Rimfire Report, and we’ll see you next week! Read More Rimfire Report Articles Below: The Rimfire Report: First 1,000 Rounds – S&W M&P 22X The Rimfire Report: ELEY Subsonic 38gr Hollow Point The Rimfire Report: The Classic Pair - Ruger 10/22 + CCI Mini-Mags