🔓 ONEPLUS NORD CE3 5G ANDROID LATEST UPDATE FRP BYPASS*(No need #899#, SIM LOCK, or any flashing)The OnePlus Nord CE3 (CPH2569) is one of the best-selling smartphones from OnePlus, running OxygenOS. But after the latest August security patch, the old FRP bypass method is completely blocked. Now, if users format the device from recovery mode, they get stuck on the FRP lock screen.I faced the same issue and spent a full day watching videos—nothing worked. There’s no working trick available for this patch. But I found a 100% working solution using the FRT Tool v1.6.3. It removes FRP with a single click—no need for flashing, firehose files, or *#899# codes.✅ This method requires MRT Dongle or MRT account login. It's paid but very cheap and safe. 🛠How to Remove FRP on OnePlus Nord CE3 5G (CPH2569)🔧 Required Tools:ToolDescriptionFRT Tool v1.6.3Tested and workingMRT Dongle or LoginRequired for authenticationUSB CableHigh-speed data transfer support📋 Step-by-Step Guide:Install FRT Tool v1.6.3 on your PC.Connect a good USB cable to your OnePlus Nord CE3.Open Device Manager and check if the device is detected.Launch FRT Tool and go to the Login section.If you have an MRT Dongle, it will auto-fill login details.If not, you can rent or buy login credentials (very cheap). You can also contact me for help.After login, go to Chipset Selection and choose Qualcomm.Do not touch Firehose settings—leave it as is.In the Port section:Power off your device.Press both volume buttons and connect to PC.Check Device Manager for the COM port number.Select the correct port in FRT Tool.Go to the Service tab on the left side.Find and click on FRP Reset.Once FRP is removed, boot into Recovery Mode and format the device again.Power on the phone and complete the setup normally.✅ Your device is now 100% unlocked.No need for previous owner's Gmail.Create a new account and start using your phone freely.